Skip to content
CommunifyCommunify.us

Search Communify

Try searching for "4DX", "risk register", "tracer", or "hand hygiene".
Press Ctrl/⌘ K or / from anywhere to open search.

Analysis tool

Pareto analysis for healthcare quality data

For quality directors, analysts and safety committees setting priorities

Pareto analysis ranks event categories to show the vital few that account for most of your safety events. This guide explains where the 80/20 rule comes from, how to build a Pareto chart from event data, and why you should rank by severity as well as by count before deciding where to focus.

3 min read · Reviewed November 1, 2026

In a quality office at dusk, a chief nursing officer points to a descending bar chart with a cumulative line on a data analyst's monitor while a nurse manager takes notes
Pareto Analysis: Safety Events by Category0%10%20%30%40%0%20%40%60%80%100%35%Med Errors25%Falls18%Communication10%Equipment8%Documentation4%Other80% lineVital FewUseful ManyFrequency (%)Cumulative (%)FrequencyCumulative %
An illustrative Pareto chart of safety events by category, with the cumulative line separating the vital few from the useful many.

Key takeaways

  • The 80/20 split is a rule of thumb; what matters is that a few categories usually dominate.
  • Fix inconsistent categories first; a large "other" bar means the chart can't be trusted.
  • Run a severity-weighted chart alongside the count so rare, high-harm events aren't lost.
  • Drill down with a second Pareto inside the top category, then switch to root cause tools.

What Pareto analysis is

Pareto analysis ranks problems or causes to find the vital few that account for most of the effect. It is named for the economist Vilfredo Pareto, who observed in 1896 that about 80% of the land in Italy was owned by about 20% of the population. The quality pioneer Joseph Juran applied the idea to quality problems, describing "the vital few and the useful many".

The 80/20 split is a rule of thumb, not a law; real data may split 70/30 or 90/10. The useful point is that effects are rarely spread evenly, so a few categories usually deserve attention first.

A Pareto chart shows categories (event types, units, contributing factors) as bars in descending order, with a line showing the cumulative percentage. The bars to the left of where the line crosses roughly 80% are the vital few. It is a prioritization tool: it tells a team where to look, not why the problem happens.

When to use Pareto analysis

Use Pareto analysis when a team must decide where to focus and has enough event or defect data to tell the frequent categories from the rare ones. It works at two levels: across the organization, using six to twelve months of events to choose which categories to prioritize, and within a category, to find which failure types drive most of it.

Once the vital few are clear, switch tools. Use fishbone, 5 Whys or HFACS to understand the causes within those categories.

ImprovementFlow

Safety Reporting

A Pareto chart is only as good as the categories behind it. Safety Reporting routes each event by type, department and severity and lets you look across events by department, severity and tag, so the recurring categories are visible without a manual sort.

How to build a Pareto chart

  1. 1Decide the question, such as which event types to tackle first on medical-surgical units this year.
  2. 2Agree the categories and make sure events were classified consistently; a large "other" bar means the categories need work.
  3. 3Choose the period and the measure: count of events, or count weighted by severity or harm.
  4. 4Sort the categories from largest to smallest, draw the bars and add the cumulative percentage line.
  5. 5Identify the vital few, then drill down with a second Pareto inside the top category.
  6. 6Repeat after changes are in place to see whether the distribution has shifted.

Example: where should the safety committee focus?

This is an illustrative example. A regional health system's quality team charts 18 months of inpatient safety event reports by category. Four categories make up roughly four in five reports: falls, medication-related events, pressure injuries and communication failures.

A second Pareto inside the medication category shows that omitted doses, wrong-time administration and documentation errors make up most medication reports, while wrong-patient and look-alike, sound-alike errors, which had dominated committee discussion, are a small share.

The team doesn't drop the rare, high-harm events; it runs a severity-weighted chart alongside the count. But it redirects most of its improvement effort to the frequent problems that, taken together, affect the most patients.

How ImprovementFlow supports this

  • Safety Reporting routes each event by type, department and severity, and reviewers add tags, so events arrive already categorized for counting.
  • Reviewers can look across events by department, severity and tag to see which categories keep recurring, which is where a Pareto chart starts.
  • When a category stands out, a reviewer can open a linked A3 improvement project from the reports, so the work to fix it stays connected to the events that revealed it.

Contact us

Bring us your event categories and your backlog. We'll show you where each report goes.

Tell us how safety events reach your team today, who reviews them and where they pile up. We'll walk through one report from a phone on the unit to a closed loop, and how review keeps pace as reporting grows across your sites.

We typically respond within one business day.

Prefer email? info@communify.us

Explore Safety Reporting →